Base Unit Pullouts

• Suitable for 15mm and 18mm carcase material for 500 or 600mm cabinets
• Each shelf supplied with runners, 2x distance angle brackets and door protection clip in grey metallic. These can be mounted onto the left or
right side, preventing any possible damage to the inside of the cabinet door from the edge of the runners
• Minimum internal depth of the cabinet is 510mm
• Height 80mm
• Maximum load capacity - 24kg per basket
• Sold in singles

• Operates via a clip on follower mechanism which pulls the back shelves
out of the cupboard when the door is opened
• Highly polished chrome wire shelves
• Can be used left or right hand
• See page 4.07 for full height tandem pull-out

Based on the same design as the drawers above but featuring:
• Heavier chrome work
• Integrated soft stop
• Full extension, self-closing runner fitted as standard
• Minimum internal depth - 49 5mm
• Minimum internal width - 462-468mm for 500mm, 562-568mm for 600mm
• Basket dimensions:
500mm with bracket - 445mm x 503mm x 140mm
600mm with bracket - 545mm x 503mm x 140mm
500mm standard - 445mm x 500mm x 127mm
600mm standard - 545mm x 500mm x 127mm
• Maximum load capacity 20kg per basket
• Sold in singles

This base unit pullout is designed for use with 150mm Wide, cabinets. It features 2 towel rails and a structural metal shelf with chrome gallery. Supplied with full extension runners (which extend 440mm out of unit) and integrated 'soft stop', a system which cushions the door as it closes. 6kg capacity.